IMA MODULE-T1/E1 ATM CR clei This module provides the Inverse Multiplexing for ATM capability for the T1/E1 ATM Cell Relay interface cards (90-6351-0x). The module supports either ATM Forum IMA v1.0 or v1.1 through separate software loads. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

7470 Documentation CD This CD contains the 7470 MSP Technical Practices Library for the current release and the two previous releases. The CD contents are determined by the product release status at the date of purchase; for example; in Q2 2008, the current release is 7470 MSP R9.1.2 and the two previous releases are R8.0 and R7.0.

OC3-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The OC3-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP) or 90-9764-03 (OC3/STM1 LR SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE) or 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module(eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label

PERIPHERAL SHELF 2 clei The Peripheral Shelf Cardfile is a 19 rackmount shelf which has 12 universal card slots (UCS) and 2 common equipment card slots (X and Y). The X (and Y if redundant fabric is required) common equipment card slot is equipped with a Dual Hub or SHUB Card. The 12 UCSs are equipped with 0, 1, or 2 Control Cards and up to 10, 11, or 12 interface cards depending on the number of Control Cards installed. One Control Card is installed for non-redundant control, two for control redundancy, and zero if Control Cards have already been installed in another Peripheral Shelf of the 7470 system. A 7470 system can be equipped with up to 8 Peripheral Shelf Cardfiles for a total of 96 UCS's. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

STM1-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The STM1-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01(SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03(MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label

DS3/E3 SPARING PANEL clei DS3/E3 SPARING/PROTECTION PANEL. This protection panel is used in conjunction with the 90-4919-01 DS3/E3 switching MAU in 1:N applications that use single port DS3 or single port E3 cards. A cable is available per 90-4920-01. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3/E3 SWITCHING MAU clei The DS3/E3 Switching MAU provides two pairs of coaxial connectors for all single port DS3 or E3 interface cards. One pair connects to the Tx and Rx of the primary card and the other is used to route to a sparing card via the sparing control panel (90-4918-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

MAU TO PANEL CABLE DS3 E3 MAU TO PANEL CABLE. This cable is used to connect the 7470 DS3/E3 switching MAU to a protection panel. It is used on the 7470 for 1:N protection of the single port DS3 or single port E3 cards. It is used in conjunction with the 90-4919-01 switching MAU and the 90-4918-01 DS3 protection panel.

SPARING CABLE DS3/E3 Protection DS3 E3 Sparing Card cable: The protection (sparing) card connects directly to the sparing panel without an intervening MAU and requires this cable. The protection panel has a special connector to terminate this cable.

SPARE S.S/PS-1/HSPS INTEG COOLING UNIT This assembly is a replacement Integrated Cooling Unit for the 7470 Switching Shelf (90-2181-01), Peripheral Shelf -1 (90-2190-01) and High Speed Peripheral Shelf (90-2291-01). It contains two fan assemblies and an alarm/power distribution assembly in an integrated package.

SPARE PS-1 AIR FILTERS - PKG OF 20 This is a package of 20 replacement air filters for the 7470 Peripheral Shelf -1 (90-2190-01), the Switching Shelf (90-2181-01) and the High Speed Peripheral Shelf (90-2291-01). Dimensions: AIR FILTER 16.8 X 4.70 X .25

1.6G DUAL HUB-2 clei The 7470 1.6G Dual Hub Card 2 is common equipment card for the Peripheral Shelf Cardfile. The Dual Hub card handles two bi-directional 800M ISL links: ISL Port#1 supports UCS 1-6 and ISL Port#2 supports UCS 7-12. Two Dual Hub Cards are required perperipheral shelf (for fabric redundancy) in multi-shelf systems.

E1 RJ45 Distribution Panel This E1 RJ45 Distribution Panel provides 8 external RJ45 interfaces to the 120 ohm E1 twisted pair ports of an E1CE card. It may only be used with E1 CE cards 90-2517-X2. The panel is a 1 vertical unit (VU) high rack mountable device.

DS3-2 ATM UNI/NNI W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems.The DS3-2 ATM Card w/CPU-2 is a triple port card. Each port is either a UNI or NNI operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The DS3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This DS3-2 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM), 90-4724-01, is *NOT* supported on this card. The enhanced Traffic Management (eTM) module is supported and can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-01 (DS3) for deployment in the 7670 ESE shelf. The 90-2322-01 and 90-7308-01 MAUs are not shipped with the DS3-2 card and each must be ordered separately. The DS3-2 card can be used in a 7670 ESE node with the appropriate adaptor card. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E3-2 ATM UNI/NNI W/CPU-2 This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The E3-2 ATM Card w/CPU-2 is a triple port card. Each port is either UNI or NNI operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The E3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This E3-2 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM), per 90-4724-01, is *NOT* supported on this card. The enhanced Traffic Management (eTM) module is supported and can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in the 7670 ESE shelf. The 90-2322-01 and 90-7308-02 MAUs are not shipped with the E3-2 card and each must be ordered separately. The E3-2 card can be used in a 7670 ESE node with the appropriate adaptor card.

ISL 10M-SIMPLEX CABLE This part contains the Up and Down ISL cabling required to interconnect a Low Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 10 meter single fiber cable with staggered ends. The part includes two ISL cables, where each ISL cable consists of an 800 Mb/s strand to create an Up or Down ISL.

7470 S/W UPGRADE TO R8.0 WITH CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R8.0, according to the upgrade requirements specified for 7470 MSP R8.0. An additional 90-6018-80/81 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. This part includes a software CD containing the 7470 MSP R8.0 software

7470 S/W UPGRADE TO R8.0 NO CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R8.0, according to the upgrade requirements specified for 7470 MSP R8.0. An additional 90-6018-80/81 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. Note that no software CD is shipped with this part.

7470 S/W UPGRADE TO R9.x WITH CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R9.x, according to the upgrade requirements specified for 7470 MSP R9.x. An additional 90-6018-90/91 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. This part includes a software CD containing the 7470 MSP R9.x software.

7470 S/W UPGRADE TO R9.x NO CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R9.x, according to the upgrade requirements specified for 7470 MSP R9.x. An additional 90-6018-90/91 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. Note that no software CD is shipped with this part.