STM1-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The STM1-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01(SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03(MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label

SPARE PS-2 AIR FILTER - PKG OF 10 Replacement air filters for the Peripheral Shelf 2 (90-4907-01); Package of 10. Dimensions: AIR FILTER 16.92 X 9.34 X .3

QUAD OC3/STM1 SFP UNI/NNI CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The quad OC3/STM1 UNI/NNI Card is a ATM interface card operating at the SONET/SDH OC3/STM1 rate of 155 Mbps per port. This card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one or more of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R8.0-R9.1 or 7670 ESE R4.0-R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP).

OC3-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The OC3-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP) or 90-9764-03 (OC3/STM1 LR SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE) or 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module(eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label

7470 Documentation CD This CD contains the 7470 MSP Technical Practices Library for the current release and the two previous releases. The CD contents are determined by the product release status at the date of purchase; for example; in Q2 2008, the current release is 7470 MSP R9.1.2 and the two previous releases are R8.0 and R7.0.